- Solved: I Need A Driver For Veo Webcam For Macbook
- Solved: I Need A Driver For Veo Webcam For Mac Catalina
- Solved: I Need A Driver For Veo Webcam For Mac
- Solved: I Need A Driver For Veo Webcam For Macbook Pro
- Solved: I Need A Driver For Veo Webcam For Macs
- Solved: I Need A Driver For Veo Webcam For Mac Os
This download is a beta driver providing Microsoft® Windows Vista™ support for your Creative WebCam Live!® Motion. For more details, read the rest of this web release note. This guide describes how to identify the Hardware IDs for a USB web cam, then try and find a driver that matches the Hardware ID. The driver must also be compatible with the version of Windows you. If you do not have the CD and installation files for your webcam, first of all, try to find them on the manufacturer's official website. If you could not find them there, do not hesitate to download free webcam drivers from our website. Found 2018 drivers for 108230 webcams. Shown page 1 from 41.
For your webcam to work you will need support for the connection and support for the actual camera hardware. Those who are already versed in kernels and modules and how to load them should skip to Section 2.2, which addresses support of the connection type. If you know your USB, IEEE 1394 or whatever bus you will be connecting your camera to is already configured and working, you should move on to the list of specific webcam hardware listed in Section 2.3.
Webcam drivers are usually available one of three ways: within the kernel, as a compilable stand alone module, or available as a pre-compiled (packaged) binary driver from your Linux distribution.
Is it possible to tell the speed of R.A.M of a Mac Mini by the serial number, and if so where would one do that? I need to know whether or not a Mac Mini is specifically Pc3-8500 through the serial number alone. Speed download mac serial numbers. Free Internet Download Serial Number. Download, install or update MachineProfile (Mac) – Collects key technical 1.0. Great vibes font free download mac. Collects key technical hardwarermation (was MacProfile). 1 2 3 Using MachineProfile, easily find your Mac's serial number, processor speed.
2.1.1. Module or In-Kernel?As a rule, often the stock kernel, or working part of the operating system, of your initial installation may already have support for what you need. Your Linux distribution vendor has likely enabled the most common options already, including the bus, or connection type, and drivers for common camera models. The driver exists either as a loadable module or within the already running kernel.
An easy way to tell if the driver is enabled is to use the dmesg command piped into less (for easy paging) to look for an acknowledgement that it was loaded when your system started up:
..which may yield something like the following, depending on your hardware:
If you don't see it, the particular driver may exist as a loadable module. If you know what that module is named, try using find; in this example we are looking for the 'ibmcam' module:
Note that up until the 2.4 series modules had the suffix .o; for 2.6+ series kernels this was replaced with .ko.
You can get a list of all modules available by typing the following at the command line:
Where `uname -r`, surrounded by forward tick marks, is your kernel version number.The following output is an example of what you might find in a USBwebcam-ready kernel , where everything is loaded as a module (allbut the relevant lines have been edited for brevity):
Once you know which module your camera needs you can find out if it is already loaded by typing the following at the command line:
As shown by the prompt above, you will need to have root privilegesto do this.You should get output similar to the following:
Most stock kernels are compiled with kmod, which enabling automatic loading of necessary modules when the appropriate hardware is detected. It may not always do so, however, so if you don't have the particular module you're seeking loaded andyou think the module may be available, try loadingit manually with modprobe, as in the following using the ibmcam module as an example:
Drivers for specific webcam models, or links to project pages hosting code for drivers, are outlined in Section 2.3. The drivers are usually available one of three ways: within the kernel, as a compilable stand alone module, or available as a pre-compiled binary from your Linux distribution.
If the support for your driver is not found either enabled statically within the kernel or as a module, don't despair. Drivers for numerous models are in the Linux kernel source (available directly from kernel.org source code repository), or in code offered separately from the kernel that can be configured to work with your current setup as oulined in Section 2.1.2. If your webcam driver is available in the kernel source but not enabled as a module or otherwise in your default system, you can either recompile the kernel from the source code you have or obtain a new version of the kernel source, either pre-packaged by your Linux distributor or directly from the previous link (as a so-called 'vanilla' kernel).If you are unfamiliar with the prerequisites and procedure of compiling your own kernel, I direct you to the Kernel HOWTOfor more information.
2.1.2. Patching, Source-Only or Precompiled Binary?You may find that your webcam is supported by only a kernel patch, by a source-only driver not requiring a kernel recompile, or you may even be lucky enough to have a distribution that makes a pre-compiled and packaged binary driver available for your computer's architecture. The procedure involved in the former is largely beyond the scope of this document and is probably best outlined in the documentation available on the web page of your particular model's driver found in Section 2.3. Some further more general documentation on these processes are, however, addressed in Section 5
2.2. Supporting the Connection Type2.2.1. USB WebcamsIf you have a USB webcam, it is likely a Linux driver has been written for your device.There are two ways of supporting USB devices in Linux.One is the more traditional kernel support, and the other is throughlibusb.For at least one webcam category, the STV0680-based models, working libusb support is recommended, at least according to the Sourceforge page on the subject.
Unless you know your driver requires libusb support, you should probably stick with the more conventional in-kernel support for USB devices beginning in Section 2.2.1.2.
2.2.1.1. LibusbLibusb is a library that allows access to the USB functions inLinux through userspace and without the need to enable kernel supportand insert modules. Most distributions, at this point, are offering libusb in their stablebranches (and some install it by default), so if you don't already havekernel support for USB devices, then you may only have to install thelibusb package in order to access your device.You must have USB device filesystem support enabled in your kernel,which most distributions do.To find out for sure, issue the following at the command line:
You should see (among others):
You may need to mount usbdevfs to enable it and see the devicefiles, which you can do at the command line with mount -tusbdevfs none /proc/bus/usb.Don't try to use libusb while your particular kernelwebcam support is enabled either statically or the module loaded; youcan only use one at at time.
You can obtain the libusb package in .rpm,.tgz or .deb format from yourLinux distribution.
2.2.1.2. Linux Kernel USB SupportKernel support is required for USB webcam support if not usinglibusb (outlined above).
For 2.2 and 2.4 series kernels, your USB webcam may require the module usbvideoto function. This is not required in the 2.6+ series.
Solved: I Need A Driver For Veo Webcam For Macbook
For generic USB bus support in Linux, you will need USB subsystemsupport in your kernel, whether usb-ohci, usb-ehci, or whatever flavorof USB driver your system prefers.USB subsystem support has been present in the Linux kernel since thelate 2.2 series.For a more in-depth discussion of USB support in general, I direct you tothe Linux-usb project site.If you want to find out which modules are loaded, at the command lineor in an xterm, type the following:
As shown by the prompt above, you will need to have root privilegesto do this.You should get output similar to the following:
If you don't have the particular module you're seeking loaded andyou think the module may be available, try loadingit directly (using the usb ibmcam module as an example):
..at which point you should see something like thefollowing:
By placing the entry ibmcam (for example) in/etc/modules (note that this varies by distribution),you can have the module load at boot-time automatically.You can then confirm the module was loaded by checking the syslog or inthe boot-time record with dmesg | less), where youshould see an entry such as the following:
2.2.2. IEEE 1394 (Firewire™,i.Link™)IEEE 1394 webcams require an IEEE 1394 PCI card or an IEEE 1394bus port on your mainboard.The IEEE interface has been supported in Linux since the early 2.4-serieskernel.If you are lucky enough to own such a device, generic informationon support of the IEEE 1394 bus in Linux can be found at www.linux1394.org.If you have a kernel older than 2.4.2, you will need topatch your kernel with one of the patches found on this pagematched to your kernel version.In addition, you will require libraw1394.The previously referenced linux1394.org site has a great installationguide.
The IEEE1394Digital Camera List, by Damien Douxchamps, offers an outstandingsummary of the capabilities of IEEE 1394 cameras as well as the currentstatus of support for individual models.
2.2.3. Generic Parallel Port Support for Parport WebcamsFor 2.2 and 2.4 kernel systems, parallel-port support must beenabled statically or as a module (stock kernels usually have thisenabled by default).You may want to read moregeneric info about parallel-port device support under the Linuxkernel before starting this process.To find out for sure if the module parport is loaded,you can check the dmesg file or use lsmod as outlined above.Using dmesg | less, you should see (among many otherlines) the following:
If you are compiling your own kernel, enable 'Parallel Portsupport'.You should enable 'IEEE 1284 transfer modes', and if you have x86 typearchitecture, you should also enable 'PC-style hardware'.
If modprobe returns an error when you attempt to load the module,note that you may need to determine and supply the hardware address wheninvoking modprobe.The most common address is 0x378 for an x86 system; 0x278 and 0x3BC areother possibilities for integrated or ISA parallel ports.Add-in PCI parallel ports may have unusual base addresses.You can also arrange multiple devices with either the parport_pc orparport_arc modules, though that topic is beyond the scope of thisdocument.
WARNING: Be sure you have the correct address beforeentering this information at the command line or else your machine maybecome unstable, crash or otherwise implode.
Your parallel port should be set to preferably 'EPP'mode, or alternatively ECP/EPP.'Bidirectional' (also known as 'BPP' or'PS/2') may work, albeit much more slowly.'Unidirectional' mode is unsuitable for scanning.The above setting can usually be accessed through your BIOS menu, atleast on x86 systems.
2.3. Specific Webcam ModelsNote that this information is frequently changing.The Linux-USBDevice Overview site is a great place to look if you have aUSB webcam.Also, you will want to check for your model's homepage at http://www.exploits.org/v4l/.The information compiled below on specific webcam models is from thesame source, so you may find more up-to-date information through theprevious link.If you can't find an entry for your particular hardware, you can findlinks to resources on how to write your own driver!
It is important to note that if your camera isn't listed,the easiest way to find out if your camera is supported is to find outwhat chipset is used in its manufacture.
This information is usually present in the specifications published inyour webcam's manual or on the manufacturer's website.
If you can't find your camera model listedand aren't sure what chipset your camera is made with,you should consider searching and/or subscribing to thevideo4linux-list mailing list hosted by Redhat.
2.3.1. 3com HomeConnect PC Digital WebcamThis driver is supported with the kernel patch located atthe homeconnectusbproject web page.It may require a kernel recompile after patching depending on yourkernel version.
2.3.2. CPiA based WebcamsPlease see the projecthome page for up-to-date information.This chipset has been used in the manufacture of both USB and parallelport webcams including the following:
Aiptek HyperVcam Fun USB (non-OV511 based)
Creative Video Blaster WebCam II USB and parallel-port
CVideo-Mail Express parallel-port
Digicom Galileo USB and Digicom Galileo Plus
Dynalink Digital Camera
Ezonics EZCam (not Pro or Plus)
I-View NetView NV200M
Microtek EyeStar USB
Pace Color Video Camera USB
SuperCam WonderEye
TCE Netcam 310 USB
Terracam USB (non-OV511 based or Terracam Pro)
Trust SpaceC@m Lite USB and SpaceC@m 100
Utopia USB Camera
ZoomCam USB and parallel-port
2.3.3. SE401, SE402 and EP800 based USB webcamsThisproject is a work in progress.The drivers and other useful information areavailable at the project homepage located here.As of writing this, it is necessary to patch and recompile your kernelin order to obtain support for these models.The driver supports the following:
SE401 chipset via the 'se401' driver:
Aox SE401 camera
Philips PCVC665 USB VGA webcam 'Vesta Fun'
Kensington VideoCAM PC Camera (Models 67014-67017)
SE402 and EP 800 chipsets via the 'epcam' driver
Spypen Actor
Rimax Slim Multicam
Concord Eye-Q Easy
Creative PD1001
Chicony DC-100
Endpoints SE402 and EP800
2.3.4. OmniVision based WebcamsThis category includes amultitude of webcam and video-capture devices manufactured by Omnivision,including the OV511(+), OV518(+), OV6620, OV6630, OV7610, and OV7620AE.The project homepage is here.Supported models include:
Aiptek HyperVcam Home and Mobile
Amitech AWK-300
I-view NetView NV300M
TEVion MD9308
Intel Me2Cam
Dlink DSB C100, C300
Hawking Tech. UC-110, UC-300 and UC-310
Puretek PT-6007
Alpha Vision Tech AlphaCam SE model AC-520
Creative Labs WebCam model PD1001 with OV518 chipset
Creative Labs WebCam 3, WebCam Go, Webcam Go Plus
Elecom UCAM-C1C20
Elta WEBCam 8211 PCC
Ezonics EZPhone Cam
Philips ToUCam XS (old version with OV518)
LG Electronics LPC-UM10
Lifeview various USB Life TV models
Genius VideoCam Express
AverMedia Intercam Elite
Maxxtro Cam22U
MediaForte MV300, PC Vision 300
Terratec TerraCam PRO and some TerraCam models
OmniVision (except those with OV519)
TRENDNet TV-PC301
Apple tv on macbook air. Trust Sp@ceC@m USB
Lifetec LT9388
BestBuy EasyCam U
Maxell Maxcam
TCE NetCam 310u
Medion MD9388
Webeye 2000B
Suma eON
Prochips PCA-3100
Ezonics EZ USB Cam II (the OV511+ models)
Waytech I-Pac VIC-30
Zoom Telephonics ZoomCam III USB (model 1598)
2.3.5. Logitech (formerly Connectix) QuickcamSupportThe QuickCam VC USB and parallel port modelwebcams are supported by the driver offered here.A kernel patch and recompile are necessary for support of this model.
The Quickcam driver is represented by two different projects that offer two different flavorsof driver for certain Quickcam models, both of which are stand-alonedrivers that do not require a kernel patch or recompile.The qce-ga and qc-usbdrivers support the following models:
Logitech (earlier models of) Quickcam Express
Quickcam Web
Legocam
Dexxa Webcam
Labtec Webcam
The qc-usb driver is more experimental but reportedly works betteron some models such as the Quickcam Web. Also, I have recieved correspondence that newer versions of the Logitech Quickcam Express no longer work with the above drivers; instead this page offers an experimental driver that claims to support the newer model.
Note to Redhat users: The qce-ga driver doesn't compile properly using themodified kernel source provided in Redhat 9, but a fix is available here.
Some Logitech camera models are supported by the Philips driverin Section 2.3.8.
2.3.6. ICM532 Based WebcamsOne driver for this chipset, homepage here, is now merged into the 2.6 kernel source; the other is (per the developer's own description) experimental and available here. Either or both claim to support the following models:
IC-Media Corp Pencam
Newer versions of the Logitech Quickcam Express
Newer versions of the Labtec Webcam
Biolux 654 microscope
Ezonics EZCam USB II (uvt8532)
Ezonics EZCam USB III
TerraCam USB
Stick Webcam
Mini WebCam
Tucan PenCam
Che-ez! Webbie
SNAKE EYE SI-8480/8481
PC CAM CP03
WEB Camera PBC0006
Clipcam
2.3.7. NW802 Based WebcamsThis chipset, manufactured by DIVIO, is supported by the driverfound here.The models supported include the following:
BTC SurfCam CMOS300k
Mustek WCam 300
Logitech QuickCam Pro USB (the earlier 'dark focus ring' model)
Solved: I Need A Driver For Veo Webcam For Mac Catalina
2.3.8. Philips USB WebcamsBecause of the expiration of the Non-Disclosure-Agreement between Philips Corporation and the former maintainer of the pwc driver, the previous kernel support for Philips PWC-chip-based webcams has been removed. Luckily a new, still experimental driver that does not require a proprietary module is under development. The old site, with a discussion of the change, can be seen at http://www.smcc.demon.nl/webcam/; the new driver is maintained at saillard.org with more information at the PWC Documentation Project.
Philips models supported by the above include the following.
PCA645VC
PCA646VC
PCVC675K Vesta, Vesta Pro and Vesta Scan
PCVC720K/40 ToUCam XS, ToUCam Fun, ToUCam Pro and ToUCam Scan
Askey VC010
Creative Labs Webcam 5, Pro Ex
Logitech 3000 and 4000 Pro, Notebook Pro, and Zoom
Samsung MPC-C10 and MPC-C30
Solved: I Need A Driver For Veo Webcam For Mac
Sotec Afina Eye Intuit quickbooks 2016 pro download.
Visionite VCS UM100 and UC300
2.3.9. SPCA50X USB Camera Linux DriverSolved: I Need A Driver For Veo Webcam For Macbook Pro
Note to Redhat users: The qce-ga driver doesn't compile properly using themodified kernel source provided in Redhat 9, but a fix is available here.
Some Logitech camera models are supported by the Philips driverin Section 2.3.8.
2.3.6. ICM532 Based WebcamsOne driver for this chipset, homepage here, is now merged into the 2.6 kernel source; the other is (per the developer's own description) experimental and available here. Either or both claim to support the following models:
IC-Media Corp Pencam
Newer versions of the Logitech Quickcam Express
Newer versions of the Labtec Webcam
Biolux 654 microscope
Ezonics EZCam USB II (uvt8532)
Ezonics EZCam USB III
TerraCam USB
Stick Webcam
Mini WebCam
Tucan PenCam
Che-ez! Webbie
SNAKE EYE SI-8480/8481
PC CAM CP03
WEB Camera PBC0006
Clipcam
2.3.7. NW802 Based WebcamsThis chipset, manufactured by DIVIO, is supported by the driverfound here.The models supported include the following:
BTC SurfCam CMOS300k
Mustek WCam 300
Logitech QuickCam Pro USB (the earlier 'dark focus ring' model)
Solved: I Need A Driver For Veo Webcam For Mac Catalina
2.3.8. Philips USB WebcamsBecause of the expiration of the Non-Disclosure-Agreement between Philips Corporation and the former maintainer of the pwc driver, the previous kernel support for Philips PWC-chip-based webcams has been removed. Luckily a new, still experimental driver that does not require a proprietary module is under development. The old site, with a discussion of the change, can be seen at http://www.smcc.demon.nl/webcam/; the new driver is maintained at saillard.org with more information at the PWC Documentation Project.
Philips models supported by the above include the following.
PCA645VC
PCA646VC
PCVC675K Vesta, Vesta Pro and Vesta Scan
PCVC720K/40 ToUCam XS, ToUCam Fun, ToUCam Pro and ToUCam Scan
Askey VC010
Creative Labs Webcam 5, Pro Ex
Logitech 3000 and 4000 Pro, Notebook Pro, and Zoom
Samsung MPC-C10 and MPC-C30
Solved: I Need A Driver For Veo Webcam For Mac
Sotec Afina Eye Intuit quickbooks 2016 pro download.
Visionite VCS UM100 and UC300
2.3.9. SPCA50X USB Camera Linux DriverSolved: I Need A Driver For Veo Webcam For Macbook Pro
Information regarding this chipset can be found here, and is under heavy development and includes partial or complete support for the following models:
Kodak DVC-325 and EZ200
Creative PC-CAM 300, 600, 750
Genius VideoCAM Express V2
Micro Innovation IC 200/IC 150
Logitech ClickSmart 310, 420, 510, 820 and Cordless models
Logitech Pocket750
Benq DC 1016, 1300, 1500, 3410
Flexcam 100
Aiptek MegaCam, [1.3 Megapixel] Mini PenCam and PocketCam 1.3M Smart
Finet Technology Palmpix DC-85
Pure DigitalDakota
3Com Home Connect lite
Megapix V4
Mustek gSmart: Mini, Mini2, Mini3, LCD 2, LCD 3
Solved: I Need A Driver For Veo Webcam For Macs
Digital Dream Enigma 1.3, Epsilon 1.3
Maxwell Compact Pc PM3
Jenoptik models
Minton S-Cam F5
D-Link DSC-350
Trust FamilyC@m 300 Movie
Aiptek Pocket DV, PocketDVII, DV3100+, mini PenCam 2, PocketCam 3M, Pencam SD 2, Pocket DV3500
Hama Sightcam 100
Micro Innovations IC50C, IC400c
FlyCam USB100
Arowana USB Camera 300 K
Intel Easy PC Camera, CS120 (Easy PC Share), PC Camera Pro (CS431), Pocket PC Camera (CS630)
Grandtec V.cap
Sigma-Apo Petcam
2.3.10. STV0680 based ModelsThe USB version of webcams made with this chipset are supported bythe 2.4.18 and above kernel with the stv680.o module.Alternatively, you can obtain the source from the project homepage.This driver supports models including the Aiptek Pencam and the NisisQuickpix 2.
If you have a serial version, the main oneof which is the Scan e-Studio, you should go here.
2.3.11. Winbond w9966cfThis is a driver for the parallel-port interface that supportsthe Philips SAA7111 CCD-control chip as found on the Lifeview FlycamSUPRA webcam. It is included in the late 2.4 kernel series and laterunder the heading 'video4linux' support.The homepage for this project is here.
2.3.12. Xirlink C-it™ HDCS-1000based WebcamsThis driver is for the USB webcams manufactured by Xirlink, IBM(PC Camera) and Veo Stingray model webcams.Support has been in the Linux kernel USB section since 2.2.12.The homepage is at http://www.linux-usb.org/ibmcam.
Solved: I Need A Driver For Veo Webcam For Mac Os
A driver for the Winbond W9967CF and W9968CF webcam IC's and hence the Webcam go and variations on it. See the project home page for details.Note that this project is dead. If you want it, ask me. ..
- File Name:webcam-go-0.1prealpha.tar.gz
- Author:winbond-webcam
- License:Freeware (Free)
- File Size:14 Kb
- Runs on:BSD; Linux
ExtraWebcam is the software that enables you to use Canon PowerShot and EOS series cameras as regular webcams for video conferencing, video recording, remote area monitoring. ExtraWebcam is the software that enables you to use Canon PowerShot and EOS series cameras as regular webcams for video conferencing, video recording, remote area monitoring and other webcam tasks. It supports any Windows software that take a standard video capture source as input such as Skype, MSN, AIM, Yahoo Messenger as well as online services like Ustream, Veetle, YouTube.
- File Name:ExtraWebcam_Setup.exe
- Author:ExtraWebcam Software
- License:Shareware ($)
- File Size:4.2 Mb
- Runs on:WinXP, Win Vista, Windows 7, Windows XP X64,Windows Vista, Windows 7 x64
Webcam driver for Labview (Windows). Driver is intended ot use with G Image Manipulation Library.
- File Name:Webcam driver for Labview
- Author:Mikhail N Zakharov
- License:Freeware (Free)
- File Size:
- Runs on:Windows
This is linux driver for webcams based on the Endpoints EP800 image controller chip. It started by a simple package for Jeroen Vreeken's patch (originally for 2.4 kernels), but there were developments in the meantime, and this project was. ..
- File Name:epcam-src-1.3.2.tar.gz
- Author:epcam
- License:Freeware (Free)
- File Size:20 Kb
- Runs on:Linux
macam is focused on developing webcam support for Mac OS X. We are trying to incorporate many different camera types. If you want a camera to work on OSX, join in! We need help with testing cameras (there are soooo many). Please visit the Web Site. ..
- File Name:macam-cvs-build-2009-09-25.zip
- Author:webcam-osx
- License:Freeware (Free)
- File Size:3.4 Mb
- Runs on:Mac
A simple-minded image capture program for USB webcams based on the OmniVision Technologies OV511/OV511+ bridge chip attached to an OV7610 CCD A simple-minded image capture program for USB webcams based on the OmniVision Technologies OV511/OV511+ bridge chip attached to an OV7610 CCD imager.
- File Name:vid-1.0.1.tar.gz
- Author:ovtvid-bsd
- License:Freeware (Free)
- File Size:14 Kb
- Runs on:BSD; Mac
IP Cam Driver is an app that turns your existing IP camera into a webcam for your computer. With IP Cam Driver, you will be able to use your IP Camera with any apps that need a webcam, such as Skype, FaceTime, Message, Yahoo! Messenger.
- File Name:IPCamDriverMac.zip
- Author:Senstic
- License:Shareware ($12.99)
- File Size:9.09 Mb
- Runs on:Mac OS X
ActiveX for caputre AVI, WMV video from webcam GOGO Webcam Capture ActiveX Control helps application developers and programmers create applications with video capture capabilities from any webcam devices. You will have the possibility to preview the real-time video and grab to DIVX, AVI, XVID or WMV file formats.
- File Name:gogowebcamcapturesetup.exe
- Author:Gogowishs Software
- License:Shareware ($29.90)
- File Size:481 Kb
- Runs on:Win All
Manage your Windows drivers with ease with Driver Check software. Driver Check can deep scan your hardware devices, detect and update the outdated drivers if available, completely backup them and restore them if necessarily.
- File Name:setup.exe
- Author:Repair-and-Secure
- License:Shareware ($34.95)
- File Size:3 Mb
- Runs on:Win95, Win98, WinME, WinXP, Windows2000, Windows2003, Windows Vista, Windo
Webcam Diagnostics is a simple assistant which gathers many system and webcam-related information in a single place. It makes it easy to identify some driver installation problems or USB issues.
- File Name:camdiag.zip
- Author:VersalSoft
- License:Freeware (Free)
- File Size:175 Kb
- Runs on:Windows
libscmodcam provides an easy way for Linux applications to capture long-exposure frames from a Philips USB webcam (if it is supported by the PWC kernel driver). Currently only the SC1 modification and the C++ language are. ..
- File Name:SC-Modified Webcam Library
- Author:libscmodcam
- License:Freeware (Free)
- File Size:32 Kb
- Runs on:Linux
Remo Driver Discover is an excellent tool that can easily solve all your driver related problems within few minutes. It scans and locates all the outdated drivers, and provides a single interface for downloading, backing and updating all the drivers.
- File Name:rs-driverd-pd0.exe
- Author:Remo Software
- License:Demo ($29.95)
- File Size:6.45 Mb
- Runs on:WinXP, WinVista, WinVista x64, Win7 x32, Win7 x64, WinServer
Related:Webcam Veo Driver - Veo Webcam - Veo Webcam Freeware - Veo Traveler Camera Driver - Veo Stingray Cam
